KLEINOX 4310 – DIN EN X10CrNi18-8 – AISI 301 – EN 10088-2, 10151

USES AND APPLICATIONS

KLEINOX 4310 Cr-Ni austenitic steel alloy whose average tensile strength can be increased considerably by cold rolling. If cold worked this alloy is applicable to welding with a good fatigue resistance. It is possible increase tensile strength from 80 up to 150 N/mm2 through tempering 400°C, 1-2h. This steel is well indicated for the production of springs and plates.

EXECUTIONS

Thickness: 0.05 – 1.5 mm
Width: 1.5 – 1000 mm
Width tolerances: DIN 59381 – on request +/- 0.03 mm
Thickness tolerances: DIN 59381 R, F or P
Surface: polished Ra max 0.15 my
Edges: slit, deburred, rounded
Straightness: 1 mm/m – on request 0.75 mm/m
Flatness: 0.20% of the width
Tensile Strength: 1000 – 2200 N/mm2

MECHANICAL PROPERTIES

Magnetism: Magnetic beyond 1300 N/mm2
Density: 7.9 g/cm3
Thermal conductivity: 15 W/Mc
Specific heat: 0,50 J/gK
Electric resistance 20°C: 0.73 Ω mm2/m
Electric resistance 200°C: 0.85 Ω mm2/m
Magnetic permeability: 50-70 gauss